10
PREPARATION FOR USE
Installing the Camera - housing tray attachment
1
4
2
3
unlock camera tray lever and
remove the tray from the housing
lock camera tray
*
place the zoom/focus knob in
place and make sure it is engaged
with lens gear
*
gently push the ON/OFF lever downwards
to make sure it is engaged with the lever on
the camera
attach the camera tray by tightening
the tray screw into the tripod socket
of the camera
place the actuator on the camera
tray in place and make sure it is
engaged with the focus mode
swtich on the camera
*
first turn the ON/OFF lever to OFF
position then
lift up the ON/OFF lever
each time before installing the camera
*
make sure the ON/OFF lever is
aligned with camera control OFF
position before sliding the camera into
the housing
*
pull out the zoom/focus knob if
installing the camera with lens and
gear attached
slide the camera tray back into the
housing along the tray rail
* drawings as illustrations only
