13
PREPARATION FOR USE
Setting up moisture alarm
CR2032
Battery
* drawings as illustrations only
*
please contact our authorized service centers if testing fails
*
please refer to page 15 for complete vacuum system guidance
1
3
2
4
remove battery
insulation film
switch on the alarm
- the moisture alarm
window will flash in
BLUE
when it is working
correctly
test the alarm
- connect the wires with a
dampened cotton bud; the
alarm will give a repeating
‘beep’ and the mositure alarm
window will flash
RED
press the battery down until it
click into place
Alarm
ON/OFF