background image

All NAUTICAM Products are warranted against 
any material and manufacturing defects for two 
years from the date of purchase for consumer 
use. This warranty only applies to products 
purchased from authorized NAUTICAM dealers 
and does not extend beyond the original retail 
purchaser.

To return your product for service, please contact 
your regional authorized service center(s). Please 
note that this warranty only applies when the 
product is purchased in the territory where the 
service center is located.

NAUTICAM does not hold responsibility for 
damage, of any nature, to any equipment used 
with and/or placed within our products.
NAUTICAM accepts no liability for any loss of 
captured images or the inability to capture images 
even if it is due to the malfunctioning of our 
products.

Unauthorized modifications and/or repairs of our 
products will automatically invalidate the 
warranty.

After installation of the port combo, please 
make sure the O-ring (s) are free from debris 
and uneven surface issues.

A water-tight/vacuum test without the camera 
inside the housing is highly recommended after 
the changing of port and O-ring(s).

Do not use lubricants from other brands with 
the silicone rubber O-ring on this housing, only 
use the lubricant provided by NAUTICAM.

Discontinue use immediately should you notice 
any leakage.

Do not open the product in a wet or sandy 
environment.  Protect the interior from moisture 
and debris in order to prevent malfunction or 
leakage.

Defective products should be shipped to our 
distributors for service, unauthorized 
disassembling and/or modifications could 
result in malfunction or leakage.

When travelling by air, do not travel with any 
port installed as this may lead to a pressure 
difference between the atmosphere and inside 
the housing.

PRECAUTIONS

Summary of Contents for SE1020-Z








Reviews: