Nauticam WWL-1 Instruction Manual Download

Page: 2 / 4

Changing the Mounting Ring:

The WWL-1 comes with two mounting rings with NA Bayonet mount pre-installed.

Follow below instruction to change the mounting ring:

NA Bayonet mount

M67 mount

Remove the eight screws from the
back of the lens.

Remove the 67mm mount ring.

Note that there are 4 small, black,

cylindrical, locating pins. All 4 pins

should remain in the back of the

lens.

Summary of Contents for WWL-1

Page 1: ...1 Require 83213 M67 to Bayonet Mount Converter Construction Housing body Aluminium alloy Surface treatment Hard anodized Lenses 6 elements in 5 groups Coating Both side Anti reflection Multi layer coa...

Page 2: ...t pre installed Follow below instruction to change the mounting ring NA Bayonet mount M67 mount 1 Remove the eight screws from the back of the lens 2 Remove the 67mm mount ring Note that there are 4 s...

Page 3: ...from below image Turn the hood to the desired position and secure if by tightening the four thumb screws 3 Observe the 4 small sockets in the bayonet ring Place the bayonet ring onto the WWL and rotat...

Page 4: ...products purchased from authorised NAUTICAM dealers and does not extend beyond the original retail purchaser 2 To return your product for service please contact your regional authorized service centre...