3.5.6.
Service Configuration (Service Password Protected)
The Service Configuration Menu allows initial configuration of the Service Password, Password Settings
(on/off), MMSI/IMO Numbers and the option of resetting the
X-Pack DS
to Factory Settings.
The Service Password is required in order to enter the Service Configuration Menu. This is a higher security
level than can be reached with the User Password and therefore ensures that the Service Configuration is
protected, and limited to authorized service personnel.
Note:
The default Service Password is set at
“NAUT”
It is strongly recommended to change it immediately after commencing initial
X-Pack DS
operation!
N 1^23' E 0^17' |1>0.10|2>1.30|3>1.80nm
|----------------------------------
| 6. Service Configuration
-----| |
| +- 1. Change Service Password
View | +- 2. User Password Settings
| +- 3. Change MMSI / IMO
-----| +- 4. Restore Factory Settings
|
Msg. |
|
-----|
|
Displ|
----------------------------------------
NUM| Select->| | |<-Back
Dynamic Keys: Service Configuration
[M5]
[Select]
Confirm Submenu
Selection
[Enter]
Confirm Submenu
Selection
[M8]
[Back]
Return to Main Menu
X-Pack DS User Manual
Version 1.0
Page 54 of 74
Printed on 02.04.2003