Installation Manual Chapter4.System Installation
©
Nautilus Hyosung, Inc.
All Rights Reserved
.
4-3
Physical Installation with Anchor Bolts Locate Sheet
▶
To install MX-5600 ATM, perform the following steps.
1. Place the
“
Anchor bolts locate sheet
”
at the place where the machine is to be installed.
2. Place the system on a flat surface. Be careful when opening the top or bottom of the
machine because it can be off balance.
3. Place the Anchor nuts into the ground according to the anchor bolts locate sheet.
(4 places)
4. Place MX-5600 ATM on top of the sheet.
5. Open the Security cover with the key provided.
6. Using the supplied combination, open the Security Door. The combination should be
changed as soon as possible.
7. After the anchor nuts are in place according to the anchor holes on the bottom of MX-5600
ATM, tighten the anchor bolts tightly.