background image

1

WHEN USING ELECTRICAL EQUIPMENT, ALWAYS 

FOLLOW THESE BASIC PRECAUTIONS:

IMPORTANT SAFETY INSTRUCTIONS

The following defi nitions apply to the words “Danger” and “Warning” 

found throughout this manual:

Used to call attention to IMMEDIATE hazards which, 

if not avoided, will result in immediate, serious 

personal injury or loss of life.

Used to call attention to POTENTIAL hazards that 

could result in personal injury or loss of life.

READ ALL INSTRUCTIONS BEFORE USING 

THE MACHINE.

To reduce the risk of electrical shock, always unplug 

the external power supply from the electrical outlet 

before cleaning, maintaining, or repairing.

To reduce the risk of burns, electric shock, or injury 

to persons:

Read this manual in full before operating the elliptical. Failure to 

follow these guidelines can produce a serious or possibly fatal 

electrical shock hazard or other serious injury. Consult a qualifi ed 

electrician as required.

1.  The external power supply should always be unplugged from the 

AC wall outlet before removing or installing parts. Never make 

adjustments or repairs while an exercise program is in progress.

2.  Close supervision is necessary whenever the machine is used by 

or near children, invalids, or disabled persons.

3.  Keep your hands away from all moving parts and keep your feet on 

the pedals while exercising. Do not operate the machine with the 

side covers removed, or outdoors.

4.  Use this machine only for its intended use as described in this 

Manual. Do not use parts, attachments, or accessories other than 

those provided by Nautilus Inc.

5.  Do not use the external power supply if it has a damaged cord or 

plug, it is not working properly, if it has been dropped or damaged, 

or dropped in water. Contact our Technical Service Department to 

arrange for the return of damaged parts. 

6.  To avoid potential safety and electrical problems, replace with 

manufacturer’s specifi ed parts only. 

7.  Connect the external power supply to a properly grounded AC wall 

outlet. Keep all cords away from heated surfaces. To disconnect 

the external power supply, remove the plug from the AC wall 

outlet.

8.  Do not let liquid enter the console. If it does, the console must be 

inspected and tested for safety by an approved technician before 

it can be used again.

9.  Never drop or insert any object into any opening on the machine. 

Keep the area underneath and around the machine clear.

10.  Do not operate where aerosol (spray) products are being used.

11.  Always wear insulated gloves when handling batteries.

12.  Do not crush, incinerate, or dismantle the battery. The electrolyte 

contains sulfuric acid, which can cause serious damage to eyes 

and skin. Should this occur, fl ush profusely with water and seek 

medical attention.

The safety level provided by the design of this equipment can only be 

maintained when the equipment is regularly examined for damage 

and wear. Inoperable components should be replaced immediately or 

the equipment be put out of use until it is repaired. Failure to follow 

the guidelines may compromise the effectiveness of the exercise 

experience, expose you (and possibly others) to injury, and reduce 

the longevity of the machine. Follow all training instructions listed in 

the manual and/or on the machine. Physical injury may result from 

incorrect or excessive training. 

Failure to follow the conditions set forth below shall limit, to the 

extent allowed by law, Nautilus, Inc. responsibility for the safety, 

reliability, and performance of this equipment.

• 

The operator manual must be read in full by each owner and 

trainer before the product is fi rst used. Each user must be 

instructed in the proper use of the elliptical and its accessories.

• 

The equipment must be used in accordance with the instructions 

for use.

• Only 

Nautilus

®

-trained or Nautilus

®

-authorized personnel should 

carry out assembly operations, extensions, readjustments, 

modifi cations, or repairs.

• 

For further information or instruction on use, maintenance or 

specifi cations, please contact your Authorized Nautilus

®

 Fitness 

Dealer or Service Technician. 

DANGER

WARNING

DANGER

WARNING

SAFETY REQUIREMENTS: 

SAVE THESE INSTRUCTIONS!

CommElliptical_AM_0805.indd   1

9/27/2005   10:26:46 AM

Summary of Contents for BE STRONG E916


























































Reviews: