1
Nautilus
®
NV915 Service Manual
Step 6 Connect Wires to Monitor
Replacing LCD Monitor
Replacing M Series (mast mount) LCD Monitor (continued)
the connections shown are for pre Wired units with Coaxial and power connections only.
For alternative configurations please refer to the LCD Monitor owners manual.
IMPORTANT!
You must wire tie the Power Wire to the LCD Bracket to avoid
accidental disconnection.
NOTE:
If you are using the optional Wired Remote, attach the end
labeled LCD TV at this time. Refer to Wired Remote Installation
Manual for more information.
Power
Antenna
Power
For alternative configurations please refer to the LCD Monitor owners manual.
These connections are not used in this configuration
Antenna
NOTE:
International version
will require supplied
Coaxial Connection
Adapter.
International Coaxial Adapters
Antenna
Power
Connections are REVERSED for the NV915 LCD Digital Monitor.