19
Nautilus® TreadClimber® Model TC916 Assembly Manual
MoVInG InsTRUcTIons
noTe:
You should only use this step if you need to
rotate the lower base unit up onto its side to
transport it.
3.0 ReMoVInG base PlasTIc
Tools needed:
1/8 Allen bit
step 1:
Remove three (3) front plastic screws
(see Figure 3-1).
step 2:
Remove right and left side plastic covers - four (4)
screws each side (see Figure 3-2).
step 3:
Remove right and left side pan covers - two (2)
screws each side (see Figure 3-3 and Figure 3-4).
figure 3-1
figure 3-2
figure 3-3
figure 3-4:
Pan without
covers.