14
5. Connection of Vacuum Hoses:
The vacuum connection port on the machine can be either a 2” hose barb or 2” male Flash Cuff. Both are
included with your MX3-500RP. The desired connector can be threaded into the vacuum port on the front of
the machine.
A 2” female Flash Cuff 1-1/2” hose adapter is also included to connect the 1-1/2” vacuum hose to the 2”
male Flash Cuff on the machine.
A 2” hose cuff for 1-1/2” vacuum hose is included to connect the 1-1/2” vacuum hose to the 2” hose barb
on the machine.
With the proper cuff attached to the 25’ Vacuum Hose, the 25’ vacuum hose is then connected to the vacuum
connection port on the MX3-500RP. The other end with the 1-1/2” cuff is connected to the cleaning tool.
When ready to begin cleaning, turn both vacuum switches to the ON position. If connected in series, the
MX3-500RP can be operated with only one vacuum for cleaning delicate fabrics. (See Vacuum Connection
instructions on Page 8) In most situations you will turn both vacuum switches ON.
TO PRIME THE SOLUTION PUMP:
1.
TURN ON BOTH VACUUMS
2.
TURN ON THE SOLUTION
PUMP
3.
BLOCK OFF THE VACUUM
PORT
4.
PRESS THE PUMP PRIMING
VALVE
Vacuum Hose connection with standard barb
and vinyl cuff
Vacuum Hose connection with Flash Cuffs
BLOCKING THE VACUUM PORT TO PRIME PUMP
Summary of Contents for MX3-500RP
