Nautilus R614, Assembly Manual / Owner'S Manual

28

Initial Setup 

During the first power-up, the Console should be setup with the date, time and your preferred measurement units. 
1.   Date: Push the Increase/Decrease buttons to adjust the currently active value (flashing). Push the Left/Right buttons 

to change which segment is the currently active value (month / day / year). 

2.   Push OK to set.

3.   Time: Push the Increase/Decrease buttons to adjust the currently active value (flashing). Push the Left/Right buttons 

to change which segment is the currently active value (hour / minute / AM or PM). 

4.   Push OK to set. 

5.   Units of Measurement:  Push the Increase/Decrease buttons to adjust between “MILES” (Imperial English) or “KM” 

(metric).

6.  Push OK to set. The Console goes back to the Power-Up / Idle Mode screen.

 Note: 

To adjust these selections, consult the “Console Set-Up Mode” section.

Quick Start ( Manual ) Program

The Quick Start ( Manual ) program lets you start a workout without entering any information. 

During a Manual Workout, each column represents a 2 minute time period. The active column will advance across the 

screen every 2 minutes. If the workout lasts for more than 30 minutes, the active column is fixed on the farthest column on 

the right and pushes the previous columns off the display.

1.  Sit on the machine.

2.   Push the User button to select the correct User profile. If you do not have a User profile set up, you can select a User 

profile that has no customized data (default values only).

3.  Push the QUICK START button to start the Manual program.
4.   To change the resistance level, push the Resistance Increase/Decrease buttons. The current interval and future 

intervals are set to the new level. The default Manual resistance level is 4. The time will count up from 00:00.

 Note: 

If a Manual workout is performed for more than 99 minutes and 59 seconds (99:59), the units for Time will shift to 

hours and minutes ( 1 hour, 40 minutes ).

5.   When done with your workout, stop pedaling and push PAUSE/END to pause the workout. Push PAUSE/END again 

to end the workout.

 Note: 

The workout results are recorded to the current User Profile.

User Profiles

The Console lets you store and use 2 User profiles. The User profiles automatically record the workout results for each 

workout, and allow the workout data to be reviewed.

The User profile stores the following data:

•   Name—up to 10 characters

•   Age

•   Weight

•  Height

•   Gender

• 

 Preferred Workout Values

Select a User Profile

Every workout is saved to a User Profile. Be sure to select the proper User Profile before starting a workout. The last User 

that completed a workout will be the default user.