Nautilus R614, Assembly Manual / Owner'S Manual

29

User Profiles are assigned the default values until they are customized by editing. Be sure to edit the User Profile for more 

accurate calorie and heart rate information.

From the Power-Up Mode screen, push the User button to select one of the User Profiles. The Console will display the 

name of the User Profile and the User Profile Icon. 

Edit User Profile

1.   From the Power-Up Mode screen, push the User button 

to select one of the User Profiles

. 

2.   Push  the OK button to select it.
3.   The Console display shows the EDIT prompt and the current User Profile name. Push OK to start the Edit User 

Profile 

option.

 To exit the Edit User Profile option, push the PAUSE/END button and the console will go back to the 

Power-Up Mode 

screen.

4.  

The Console display shows the NAME prompt and the current User Profile name. 

 Note:

 The User name will be blank if this is the first edit. The name of a User Profile is limited to 10 characters.

 The currently active segment will flash. Use the Increase/Decrease buttons to move through the alphabet and blank 

space (found between A and Z). To set each segment, use the Left(



) or Right(



) buttons to shift between segments. 

 Push the OK button to accept the displayed User name.

5.   To edit the other User data (EDIT AGE, EDIT WEIGHT, EDIT HEIGHT, EDIT GENDER), use the Increase/Decrease 

buttons to adjust, and push OK to set each entry.

6.   The Console display shows the SCAN prompt. This option controls how the workout values are displayed in the Lower 

Display during a workout. The “OFF” setting allows the user to push the RIGHT or LEFT buttons to view the other 

workout value channels when desired. The “ON” setting allows the Console to automatically display the workout value 

channels every 6 seconds. 

The default is “OFF”.

Push the OK button to set how the workout values are displayed. 

7.    The Console display shows the EDIT LOWER DISPLAY prompt. This option allows you to customize which Workout 

Values are displayed during a workout

. 

 The Lower Display will show all of the workout values, with the active Workout Value flashing. The Upper Display 

shows the active value setting: “ON” or “OFF”. Push the Increase(



) or Decrease(



) buttons to hide the active 

workout value, and push the Left(



) or Right(



) buttons to shift the active workout value. 

Note:

 to show a hidden workout value, repeat procedure and change Upper Display value to “ON” for that value.

When done with customizing the Lower Display, push the OK button to set it.

Hr

8.   The Console will go to the Power-Up Mode screen with the user selected.

Reset a User Profile

1.   From the Power-Up Mode screen, push the User button 

to select one of the User Profiles

. 

2.   Push  the OK button to select it.