Nautilus T628, Assembly Manual / Owner'S Manual

43

For every workout completed that is longer than 10 minutes or a mile (1.6 km) in distance, the Console will apply those 
workout values toward your Fitness Score. This value is displayed on the Fitness Score Display area of the Console.

Note:

   Using a Heart Rate Chest Strap provides the most accurate information to calculate the Fitness Score. A Fitness 

Score is provided when a minimum of 10 minutes or 1 mile (1.6 km) of distance is done during a workout. If no 
heart rate is supplied, an appro

[

imation based on the User Profile will be used to calculate the score.

The Fitness Score may change only slightly for a User that performs the same length of workout at a similar intensity level. 

However, if that same User were to increase intensity over the same length of a workout, their score would increase. Since 
the score is based on VO2 Ma

[

 (estimated), even a small score increase shows a significant shift in the User’s fitness level.

Note:

   A User’s score may drop slightly if fatigue is present. With the proper combination of e

[

ercise and rest, a User’s 

Fitness Score will rise in a similar way to their VO2 Ma

[

. This will also be reflected in their ability to perform 

longer or faster workouts. Fitness Scores should only be compared to your previous scores and not to other User 
Profiles.

Pausing or Stopping

The Console will go into Pause Mode if the user pushes PAUSE/STOP during a workout. 

1.  Push the PAUSE/STOP button to pause your workout. The Console will display “ PAUSED “.
2.  To continue your workout, push the START button.
 

To stop the workout, push the PAUSE/STOP button. The Console will go into Results / Cool Down mode.

Results / Cool Down Mode

All workouts e

[

cept Quick Start and the Heart Rate Control programs have a 3-minute Cool Down period. During this 

Cool Down period, the Console shows the Workout Results. The Console will cycle through the workout results every 4 
seconds.
During the Cool Down period, the speed of the walking belt will adjust to 2 mph (3.2 km/h) and the incline setting will ad-
just to zero. The User can adjust the belt speed and deck incline during the Cool Down period. 
Push PAUSE/STOP to end the Results / Cool Down period and go back to Power-Up Mode. If there is no input to the 
Console for 5 minutes, the Console automatically goes into Sleep Mode.

GOAL TRACK Statistics (and Achievements)

The statistics from every workout are recorded to a User Pro

¿

 le.

To view the GOAL TRACK statistics of a User Pro

¿

 le:

1.  

From the Power-Up screen, push the User button to select a User Profile.

2.  

Push the OK button to select the User Profile.

3.  

The Console display shows the GOAL TRACK prompt. 

Note: 

To e

[

it the User Pro

¿

 le options, push the PAUSE/STOP button and the console will go back to the Power-Up 

Mode screen.

4.  

Push the OK button. The Console will display the “LONGEST WORKOUT”, the workout values and activate the cor-
responding Achievement light. After 4 seconds, the Console will display the name of the workout, and then the date it 
was performed (e

[

cept for “LAST 7 DAYS” and “LAST 30 DAYS”).

Note: 

To e

[

it the GOAL TRACK statistics, push the PAUSE/STOP button and the console will go back to the Power-Up 

Mode screen.

5.  

Push the Decrease(

d

) button to move to the ne

[

t GOAL TRACK statistic, “CALORIE RECORD”. The Console will 

display the workout results with the most Calories value. The Console will cycle between the workout results, the name 
of the workout pro

¿

 le, and the date of the workout every 4 seconds. Use the Left(

e

) or Right(

f

) buttons to force the 

cycle between the workout results.