Installation Tool List
The following tools are recommended to perform installation of the Nauto 3 Device:
Digital multimeter with sharp leads
(or wire piercing leads)
Trim panel removal tool
T5 Torx driver with handle
Crimp Connectors
Electrical tape
Zip/Nylon ties
Wire strippers
(self strippers)
18AWG ring terminals
Wire crimpers
(capable of crimping insulated terminals)
Self-tapping screws
4
© Nauto 2020. All RightsReserved.
Nauto Components
Nauto 3 Device
1.
2.
Windshield Mounts
4.
FuseHolder
w/ 3amp fuse
3.
Mark Button
(see Mark Button Install Guide)
This is optional and may not be included.
If included, do not dispose of small bag
with “MAC address” label.
5
.
PowerCable
2 versions: hardwire and OBD
6.
OBD Y-Cable
This is optional and may not be included
1
2
3
4
5
6
Note: Vehicle specific tools may also be required.
Nauto Recommended Connection Methods
6
Poke &Wrap
Requires splicing into a low voltage wire for aconnection.
See above
Posi-Tap
Requires posi-tap connectors to tap into wires without cutting or splicing.
Proper sizedposi-taps
Solder
Requires a heated tool to bond wires using a filler metal with low melting point.
Solderingiron
Connection Method
Description
Recommended Tools
Add a Fuse
Power splitter installed in the vehicle’s fuse box
Proper size fuse connection
