Table 4.8 continued from previous page
Field ID
Description
Coords.
Coordinates format. These can be either:
DD°MM'SS?
DD°MM.mmm'
DD.dddd
UTM
4.9.9 Device Settings
This menu option allows the user to execute some recovery functions. A short description of the available
options is shown in Table
4.9
.
Table 4.9: Device Settings
Function
Description
Factory Settings
Reset all parameters to the default factory values. This will not
change the layout to the factory default layout. Care should be
taken because all changes made by the user are lost.
Reset now
Makes a hardware reset to the instrument. The result is the same
as the one presented in Section
1.5
.
Auto-o
If set to Yes the NAV SD turns o if the GPS speed is less than
5 km/h, and integrated vario less than +-1.5 m/s, for more than
30 seconds.
4.9.10 RF Probes
The RF Probes menu option allows the user to pair up any of the Flymaster wireless devices including the
M1 and Heart-G to the NAV SD . Pairing is performed automatically. When ENTER is pressed the NAV
SD will look to see what wireless devices are around and it will shows these on the screen (see Figure
4.33
).
Devices are identied by their name (e.g. M1, TAS) and serial number. Devices can be selected using the
UP, or DOWN keys. For the selected (highlighted) device the pairing state is shown on the bottom of
the screen. To pair a device the state should be changed from No to Yes. Once paired the NAV SD will
always automatically connect with the wireless device. The NAV SD can be paired with several devices.
46
Summary of Contents for Flymaster NAV SD
Page 1: ...User manual Version 3 0...
Page 54: ...Figure 4 42 GPS Reset 53...
