BHM
10/25/18
NTV-DOC257
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for misuse of its product.
If you do not agree, please discontinue use immediately and return product to place of purchase. This product is intended for off-road use and passenger
entertainment only.
9 |
P a g e
D.
Locate pins
6 & 12
(labeled on inner connector). Populate
pin 6
with the signal (+) and
pin 12
with the shield (-) from
NTV-CAB071
RCA like shown.
E.
Reconnect the inner connector to the outer sleeve and connect a zip tie to prevent stress to the
wires.
F.
Reconnect the harness to the screen, connect reverse camera signal to the newly populated
RCA and test for functionality.
(+)
