JR, BM
09/03/15
NTV-DOC 144
rB5
2 |
P a g e
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
REC-AV Programming
Before the product is installed, be sure the module is programmed for needed functions. To
change any one of the settings, double click the line with the feature to be enabled/disabled.
Down
REC-AV Module Pin Outs
Adjustable Parameter
Description
VES Emulation
Emulates rear seat entertainment for AV input
(Do not turn on if vehicle already has factory VES.)
Rear view camera
Turns on rear camera input to add an aftermarket camera.
(Also required for VES video input.)
12V output when camera is forced
Supplies 12v out of Pin 12 when forced camera is enabled or
the when in reverse
Front view camera
Supplies 12v out of Pin 11 when front camera is activated.
Pin #
Description
Color
1
12v (+) Constant Power
Yellow
6
Relay 1-Common-Video OUT
Yellow
7
RCA Common Shield
[Shield]
8
CAN HI (Radio side)
White/Green
9
CAN HI (Car side)
Brown/Black
10
Ground (-)
Black
11
Output 1
(Front cam 12v out)
White/Red
12
Output 2
(Rear cam 12v out)
White/Blue
13
Output 3
(ACC 12v + out)
White/Purple
15
Relay 1 (normally open) Vid IN
White
16
Relay 1 (normally closed) Cam IN
Red
17
CAN LO (Radio side)
Green
18
CAN LO (Car side)
Brown
Wire side
