DS, BM
05/05/14
NTV-DOC089
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
3 |
P a g e
WARNING! Before proceeding to the next steps, make certain the key is off and
out of the ignition. Failure to do this may trip and airbag light!
3.
Using a plastic pry tool, pry on the upper trim along the outside edge of the shroud
containing the HVAC controls to release the clips. Disconnect all the wiring and remove
the airbag light button from the structure.
Plug only the airbag light button back into
the wiring harness to avoid an airbag fault light.
4.
With the upper trim removed locate the 4x 7mm/Phillips screws (two on each side of
the radio) that hold the radio in place. Remove the screws and pull the radio gently out
of the dash.
5.
Disconnect all wiring and set the radio aside.
