Page 12
IP CAMERA USER MANUAL
VBR means that the compression bitrate can be adjustable according to the change of the
video resources. This will help to optimize the network bandwidth.
Video Quality
: When VBR is selected, you need to choose image quality. The higher the
image quality you choose, the more bitrate will be required.
Bitrate
: Please choose it according to the actual network situation.
I Frame interval
: It is recommended to use the default value. If the value is over high, the
read speed of the group of pictures will be slow resulting in the quality loss of the video.
Video encoding profile
: Baseline and main profile are optional. Baseline profile is mainly
used in interactive application with low complexity and delay. Main profile is mainly used for
higher coding requirement.
Alarm picture size
: Please select it according to the actual situation.
Video encode slice split
: If enabled, you may get more fluency image even though using the
low-performance PC.
4.2.3
OSD Configuration
Go to “Video Config”
“OSD Config” menu to display the interface as shown below.
You may set time stamp, device name and custom OSD here. Drag the time stamp and custom
OSD to set their position. Then press the “Save” button to save the settings.
4.2.4
Video Mask
You can set 4 mask areas at most.
