Page 3
IP CAMERA USER MANUAL
administrator and click “Modify” button to modify the setting.
④
Double click the IP address and then the system will pop up the IE browser to connect
IP-CAM. IE browser will auto download the Active X control. After downloading, a login
window will pop up as shown below.
Input the username and password to log in.
2.1.2
Directly Access through IE
The default network settings are as shown below:
IP address:
192.168.226.201
Subnet Mask:
255.255.255.0
Gateway:
192.168.226.1
HTTP:
80
Data port:
9008
You may use the above default settings when you log in the camera for the first time.
①
Manually set the IP address of the PC and the network segment should be as the same as
the default settings of the IP camera. Open the network and share center. Click “Local Area
Connection” to pop up the following window.
The default password of the administrator is “
123456
”.
The default username is “
admin
”; the default password is “
123456
”.
