7 | 9
A small roll of Coax-Seal. It is a putty like
material in tape form. The white waxed paper
keeps it from sticking to its self.
Note that the first wrap comes back on itself
exactly and the second turn starts the diagonal
wrap. Wrap from the coax cover toward the
fitting with one half overlap with each winding.
The last wrap again comes straight back over the
previous wrap without a diagonal. The seal is
slightly sticky and should be molded now by hand
to remove any gaps and to ensure that all the
wraps are blending together. At some point the
wraps will almost fuse together and the material
may have to be cut away from the cable.
A view of the connectors with the coax seal cut
away from the connectors
