16
Preparing for Dive
Power On and Connect
Drone
1.
Open the battery chamber at the bottom part of Navatics MITO.
2.
Connect the battery cable to the battery's waterproof connector,
3.
Push the battery into the chamber to lock it in place.
4.
Switch on the battery to turn it on and close the chamber
When started, MITO is going to check for the states of its sensor. In the process, it will turn on
the LED lights as an indicator, as well as changing the color of LED ring to indicate the process.
Once all sensors are calibrated, the LED lights will turn off and the LED ring will turn white.
NOTE:
If the light is blue, it is necessary to calibrate the sensor, please refer to Sensor Calibration
instructions on page 19
White: Normal
Blue: Calibrating
Red: Problem occurred (See trouble shooting on page 24)
Summary of Contents for Mito
Page 1: ...I Underwater Drone Owner s Guide...
Page 17: ...12 Quick Start...
