2087122_Manual_16903_02_V1
7 / 26
NOTE
DANGER
NOTE
Installation
Electric shock
Disconnect the mains voltage or mains plug before starting work.
Make sure that no hazards can be caused by electrically conductive objects or media.
Make sure that the type of electrical installation does not reduce the protection against electric shock
(protection class, protective insulation).
Make sure that the cable is not bent excessively or crushed.
Non-compliance with these instructions will result in serious or fatal injury.
Cleaning and care
Damage to the product
Do not use any solvents for cleaning.
Non-compliance with this instruction can cause damage to property.
Only clean the product when it is switched off and has cooled down.
Limit the care of luminaires to the surface only.
Prevent moisture from getting into connection compartments or on live parts.
Use a soft, dry cloth for cleaning.
Repair and Spare parts
Unsuitable parts
Use original spare parts and accessories from the manufacturer only.
Non-compliance with this instruction can cause damage to property.
In case of complaint, contact your responsible specialist dealer or contact our service hotline directly.
Telephone number: +49 (0)7947 9100-0
E-mail: info@naeve.de
For technical questions, please state the order number (e.g. 16648). The order number can be found on the type
plate.
