33.
What service schedule could you use for servicing the slip splines?
A.
Same as the differential
B.
Same as the transmission
C.
Same as the U-joints
D.
Same as the transfer case
34.
When replacing the hanger bearings, make sure you look for and do not lose
track of the
_.
A.
bolts
B.
hanger locks
C.
washers
D.
shim pack
35.
When removing the U-joint cups, ensure the bearing cups stay matched with the
they came from.
A.
trunnion
B.
yoke
C.
transom
D.
spline
36.
Although acceptable, what is the least preferred method to remove a U-joint?
A.
Heat
B.
Puller
C.
Place in a vise and tap the yoke
D.
Arbor press
37.
(True or False)
Regard a U-joint cross, its four bearing assemblies, and
mounting hardware as a unit, and replace as such.
A.
True
B.
False
38.
With the full round end yoke, what is the next step after both bearing cups have
been seated in the yoke, the lock plate tab is in place, and the bolts are in the
yoke threads?
A.
Torque them down with a wrench
B.
Turn them in first by hand
C.
Add grease to the threads
D.
Add the retainer clips
39.
An unbalanced driveline causes transverse
and bending
in
the driveshaft.
A.
movements, vibrations
B.
action, movements
C.
rotation, action
D.
vibrations, movements
NAVEDTRA 14050A
8-105