7.
When the clutch is being uncoupled, a series of slight movements (pulsations)
can be felt on the clutch pedal. The trouble indicated may be caused by which of
the following conditions?
A.
A warped pressure plate or warped clutch disc
B.
The flywheel not being seated on the crankshaft flange
C.
Misalignment of the engine and transmission
D.
Each of the above
8.
In automatic transmissions, gears are designed so that several teeth are in
contact with one another at one time. This design is used for which of the
following reasons?
A.
To provide greater strength
B.
To provide greater gear reduction
C.
To reduce gear clash
D.
To increase torque
9.
When torque is increased during the operation of a planetary transmission, what
will happen to the output speed?
A.
It will remain the same.
B.
It will increase.
C.
It will decrease.
10.
Your holding the sun gear stationary and applying power to the internal gear in a
clockwise direction will produce what result in gearing?
A.
Overdrive
B.
Reverse
C.
Direct drive
D.
Reduction
11.
What results when two members of a planetary gearset rotate together?
A.
Reverse
B.
Low gearing
C.
High gearing
D.
Direct drive
12.
What means or device within the torque converter allows for shifting without
interruption of engine torque application?
A.
The turbine
B.
The fluid coupling
C.
The stator
D.
The impeller
NAVEDTRA 14050A
7-24
