III
NO
NC
NO
NC
Wiring diagram
NavEye™ BlackBox PLUS
GROUND, negative terminal
87a
G
REY
- G
RO
U
N
D
30
87
86
85
30
87a
87
86
85
WHITE – RELAY CONTROL
BLUE -IMMOBILIZER
YELLOW - BURGLARY
PINK – GAS & FIRE
GREEN – WATER LEVEL GUARD
BROWN - OTHER
+8V to +32V (BATTERY)
RED
- PL
U
S
INPUTS
OUTPUTS
RED
– Connect to plus 12V (constant voltage, accepting 8V – 32V).
GRAY
– Connect to ground, the battery’s negative terminal.
INPUTS
PINK – Connect the pink wire to smoke/gas alarm. Connect the other wire from the smoke alarm to +12V.
YELLOW – Connect the yellow wire to an IR sensor or magnetic switch. Connect the other wire from the sensor to +12V.
(If more than one burglary sensor is used, connect them in series.)
GREEN – Connect the green wire to the water level guard. Connect the other wire from the sensor to +12V.
BROWN – Brown wire can be connected to optional accessories. Connect the other wire from the sensor to +12V.
OUTPUTS
BLUE – Connect to a relay. It can control an immobilizer. This output follows the alarm, activated – can’t start the engine,
deactivated – can start the engine.
Connect the blue wire to 85 and ground to 86. Connect 30 and 87 in series with the wire between e.g. the ignition key and
starter.
WHITE – Connect to a relay. Control such as refrigerators. Turn on/off the output with an SMS command.
Connect the white wire to 85 and ground to 86. Connect 30 and 87 in series with the on/off function for example the
fridge.
+
-
BATTERY
8V – 32V