Time
Time offset
¼
Note:
This function is also available as a Shortcut.
Select TIME OFFSET to ent
er the diff
erence between UTC and local time in 15 minute increments with a
maximum off
set of ±13 hours.
¼
Note:
Does not automatically adjust for Daylight Savings Time.
Time format
¼
Note:
This function is also available as a Shortcut.
Select to toggle between 12 and 24 hour format.
Vessel call sign
Select to enter vessel call sign. Used by the MOB and AIS functions.
Auto power ON
Select AUTO for the radio to always turn ON when power is applied to the radio. If OFF, the radio must
always be turned on manually.
Menu timeout
An inactivity timeout can be set to return the radio to normal operational mode after a period of inactivity
while the radio is displaying a menu.
Select between NONE, 5 MINS, 10 MINS, and 15 MINS. (default is 10 MINS).
¼
Note:
A diff
erent timeout is used when the radio is left in a DSC call.
Refer to “DSC timeout” on page 28 for more details.
DSC/ATIS setup
DSC function
¼
Note:
This function is also available as a Shortcut.
It is recommended that DSC functionality is always enabled, unless operating the vessel in an ATIS region.
When enabled, the
symbol is displayed.
¼
Note:
An MMSI number must be entered in radio before the DSC function can be enabled.
User MMSI
Enter an MMSI number to access the radio’s DSC functionality. T
his unique identifier must be supplied b
y a
local radio spectrum authority. DO NOT enter a random ‘made up’ number.
¼
Note:
Contact a Simrad or B&G dealer if you need to change your MMSI after initial input.
ATIS function (EU country mode only)
ATIS must be enabled when navigating inland waterways in signatory countries of the RAINWAT
agreement. It should NOT be used outside these regions. When enabled, the
symbol is displayed
and CH10 is automatically selected.
¼
Note:
DSC functionality is disabled when ATIS is turned ON.
Sea/Inland use (EU country mode only)
¼
Note:
This function is also available as a Shortcut.
Toggles between DSC (Sea) and ATIS (Inland) modes. Does not allow both to be selected at the same time.
26 |
Radio menus |
RS100 / RS100-B / V100 / V100-B User Manual
