INTERVAL
The frequency that ‘buddies’ are polled with position requests can be selected between: 5, 15, 30 and 60
minutes.
Contacts
Used for the administration and calling of CONTACTS and GROUPS.
VIEW/ADD CONTACT
Use this to create, edit, or delete up to 50 vessel CONTACTS with names and MMSI’s. Contacts are stored
by name, in alphabetical order.
Select ADD NEW to create a new contact.
Selecting an existing name in the Contacts list gives the options to place a DSC call, make a position
request, edit or delete the contact.
VIEW/ADD GROUP
Use this to create, edit, or delete up to 20 contact GROUPS, which are stored in alphanumeric order. Only a
name and a Group Call ID (GCID) are required to set up a group. A GCID always starts with 0; the remaining
digits can be set to whatever the user desires. All vessels intended to be in the same group must have a
suitable DSC radio, and have the identical GCID number entered.
Selecting an existing name in the group list gives the option to edit, delete, or call the group.
¼
Note:
Adding a group to this list will in turn make the radio respond to a group call made from any
other radio with the same group number in its memory.
Call logs
Shows a record of SENT, RECEIVED, and DISTRESS calls. The number of calls for each category are displayed
in parenthesis in the format (viewed / total).
Press
OK
to select a category:
Press
DSC/MENU
for options:
You have several options depending on the selected Call Log:
•
RESEND to resend the SENT Call
•
POS REQUEST to request a position form the vessel
•
DETAILS to view the message details
•
SAVE TO CONTACTS to save the contact details to your Contacts list
•
DELETE to delete the message
•
DELETE ALL to delete All messages in the selected call log.
| 39
DSC call menu |
RS100/ RS100-B / V100 / V100-B User Manual
