92
Version 2.0
Operator’s Manua
l Position
POS2 - Position, Altitude, Magnetic Variation, & Time
This screen is divided into three windows. The upper left window
provides your position coordinates, the antenna altitude (above Mean
Sea Level - MSL), altitude mode (2D or 3D), the magnetic variation
(Variation) for your present position, and the present datum in use for
calculating your position.
The lower left window displays your course and speed over ground. If
the degree symbol has a small ‘c’ under it, this indicates that the mag-
netic variation and compass deviation table are being calculated and
displayed. Refer to the
CFG1
Compass
section for more details on
how to set this up.
The right hand window indicates today’s date and time. This setup is
in the
CFG1
Time
menu. It can be set for UTC time, local 12 hour time,
or local 24 hour time. There is an added summer/winter feature to help
you remember which direction to set the clock for day light savings in
the summer.
There are no editing capabilities in this screen.
POS3 - Position & Log
This screen is divided into three windows. The upper left window is
the same as
POS2
and provides: your position coordinates, the an-
tenna altitude (above Mean Sea Level - MSL), altitude mode (2D or
3D), the magnetic variation (Variation) for your present position, and
the present datum in use for calculating your position.
Summary of Contents for MX420
