102
Version 2.0
Operator’s Manual
Configuration
anchor alarm in this screen to go from
Off
to
On
. Likewise, if you turn
the anchor alarm from
On
to
Off
in this screen the
Anchor
screen will
also match this one.
Anchor - Anchor Watch Alarm
This screen allows you to setup an anchor watch alarm and maximum
drift radius after you drop the anchor. The receiver will remember the
drop coordinates and provide an alarm if the antenna drifts beyond the
maximum distance you entered. If you are on a large commercial ship,
don’t forget that the anchor may be several hundred feet from the
receiver antenna. You will need to consider this when setting in the
distance.
COG SOG - Course & Speed Filter Settings & Setup
This screen controls the Speed Over Ground (SOG) unit of measure
(meters per second, kilometers per hour, miles per hour, or knots). You
can also set a filter time to average your speed and course over ground
measurements. This helps to smooth these measurements on the dis-
play and NMEA output, a particularly useful tool for slow moving
vessels. The default filter setting is 2.0 seconds.
Summary of Contents for MX420
