Version 2.0
121
Configuration
Operator’s Manual
WPL - Waypoint Location Data Record:
The receiver outputs all of the waypoints in the active route. If
you want to output the complete
Waypoint Bank
, simply press
the
Send All
softkey from the
NMEA WPL
screen.
The WPL record, as defined by the NMEA 0183 standard,
technically does not allow the output of waypoint descrip-
tions when interfacing to other devices such as Chart Plotters.
However, MX Marine realizes that with 2000 waypoints, you
have spent a lot of time preparing your library of waypoints
with definitions and symbols. You probably will want to record
these to a PC, just in case the memory in the receiver fails in the
future. For this reason, we have provided you the option to
Include Waypoint Names
in the WPL record to save your
waypoints to a PC or to meet the NMEA 0183 standard for
interfacing to other marine equipment. The definition of the
differences between these two formats is given in the
WPT
section of this manual and in the NMEA 0183 format section of
the
Installation & Service Manual
.
Summary of Contents for MX420
