148
Version 2.0
Operator’s Manual
Automatic Identifaction System
the
softkey to toggle to Administrator.
5. Move the cursor down to MMSI, Ship or Call Sign field.
6. Press the
softkey.
7. Enter the administrator password indicated on the password card located at
the last page of this manual (i.e. admin)
To enter the example password “admin” do the following:
a. Press the #1 key to bring up the lowercase letter “a”.
b. The cursor will advance to the next character.
c. Press #2 key 1 time to bring-up the letter “d”.
d. Press the #5 key one time for letter “m”.
e. Press the #3 key 3 times for letter “i”.
f. Press the #5 key 2 times for letter “n”.
g. Press the Done softkey.
8. Move the cursor to the MMSI number and enter the desired value.
9. Move the highlight to “Ship:” and spell out the name of the vessel (up to 20
alphanumeric characters).
10. Move the highlight to “Call Sign:” and enter up to 7 characters.
11. To change other setup items use the cursor key to scroll down or up and
enter the number or name required or press the
softkey when
available.
12. At the end of editing, press the
E
key to exit.
Configuring the AIS Voyage
Information about the ship’s destination, ETA time and date, number of
passengers/crew and type of vessel are entered in the MX420 for each voyage
or whenever needed.
AIS Voyage Parameter Descriptions:
Nav Stat
- Press the
softkey to select specific status. This setup item
controls the AIS status icon shown on the upper-right corner of
the display. See section below for all available nav-stat icons
and descriptions.
Summary of Contents for MX420
