Version 2.0
149
Automatic Identification System
Operator’s Manual
Destination
- Enter the 20 character destination name. A string of
indicates the destination has not been set.
ETA Time
- Enter the estimated time of arrival at the desired destination.
ETA Date
- Enter the estimated date of arrival at the desired destination.
Draught
- Enter draught height in meters.
No. of People
- Enter the number of people on board (1-8191).
Ship/Cargo Type
- Use the
softkey to toggle ship cargo choices.
Refer to table A.2 for possible ship type values (0-255).
Softkey Descriptions:
-
used to toggle through various values available in the field.
- press this softkey to send the information about the number of people
on-board to the transponder for broadcasting.
Nav Stat Icons and Descriptions:
Vessel underway
Not Defined
Vessel not commanded, limited maneuverability, limited by draught, aground
or reserved for future use.
Ship is anchored or moored
MX420 not communicating with transponder
Note: The displayed icons located on the top-right corner of the screen is set to
blink off and on every 3 seconds to allow the operator to see what is behind
it and is not considered an alarm condition. An every second blinking is
an alarm condition.
Summary of Contents for MX420
