Version 2.0
151
Automatic Identification System
Operator’s Manual
AIS Function Key
Several AIS display pages are available under the AIS key. Pressing the AIS key
repeatedly will scroll through the following AIS screens (paging can also be done
by using the left or right arrow keys after pressing the AIS key), namely:
AIS1 - OWN SHIP DATA
AIS2 - REMOTE SHIP LIST
AIS3 - RX SAFETY MSGS
AIS4 - TX SAFETY MSG
AIS5 - TX SAFETY LIST
AIS6 - REGIONAL AREAS
AIS7 - LONG RANGE LIST
AIS8 - AIS DATA LINK (SAAB transponder only)
AIS9 - AIS STATUS
AIS10 - AIS PASSWORD (SAAB transponder only)
AIS 1 – OWN SHIP DATA
This display shows the ship’s information transmitted by the AIS transponder.
Information such as ships’s name, MMSI #, call sign, IMO #, ship type/cargo,
navigation status are all configured under the AIS Static setup, while the destina-
tion and ETA are taken from the AIS Voyage setup. It also gives you an idea
which GPS is being used under the GPS Source field and its antenna offset data.
Display Field Descriptions
:
Name:
Vessel’s name
MMSI:
Maritime Mobile Service Identity number used for identification of
ship and message
Ship/Cargo Type:
Ship & Cargo Type (see table A-1 for values)
AGE:
Age of the information on the display, in seconds
Nav Stat:
Navigation status as entered in AIS Voyage setup
CALL SIGN
:
Assigned radio call sign
IMO:
International Marine Organization number (when available)
Summary of Contents for MX420
