Version 2.0
207
Glossary
Operator’s Manual
PARALLEL
The perimeter of a parallel plane in the earth’s ellipsoid. The paral-
lels define latitude. A special case parallel is the equator, whose
latitude is 0 degrees and to which all other parallels are referenced.
PARITY BIT
A bit added to, or subtracted from, a binary coded message for
parity checking purposes.
PARITY CHECK
A simple statistical operation performed by the software that moni-
tors binary coded data being transmitted to verify that the received
message is the same as the transmitted message.
PARITY CONVENTION
In checking message parity (refer to PARITY CHECK), the soft-
ware may be designed to check either odd parity or even parity.
The choice is called parity convention: either odd or even parity
convention. Under odd parity convention rule, the binary-coded
message has the parity bit set to make up an odd number of mes-
sage bits. Under even parity convention rules, the binary-coded
message has the parity bit set to make up an even number of mes-
sage bits.
P-CODE
A limited-access signal broadcast by the NAVSTAR satellites cur-
rently available only to military users.
PDOP (Position Dilution of Precision)
An indicator of the accuracy in position (latitude, longitude, and
altitude). See DILUTION OF PRECISION.
PLANE PROJECTION
The technique of converting the curved surface of the Earth to a
flat surface to represent a map.
P
olled Mode
A transponder is in a polled mode during a request-response
session only. Distinguish this from a station, which is polled into
certain slots. This station is first polled and then enters assigned
mode.
Summary of Contents for MX420
