18
Version 2.0
Operator’s Manual
Navigate
Navigate
There are four basic
NAV
screens.
NAV4
only provides data if appro-
priate sensors (e.g. wind speed/direction logs, NMEA compass, etc.)
are interfaced and activated on the CDU. The
NAV
functions are highly
interactive with the
RTE1
screen, and a number of
CFG
menu selec-
tions.
The
RTE1
screen provides the active route for the
NAV
screens. It
also maintains a waypoint pass log for you. One other important fea-
ture in the
RTE1
screen that you need to be aware of is that the
up
and
down
arrow softkeys control which waypoints are skipped (down ar-
row) and which are restored (up arrow) for your current route. The ETA
information is configured in the RTE 1 screen. Refer to the
Route
sec-
tion of the manual for a full description.
The following
CFG
menus directly impact the
NAV
functions:
¾
COG SOG - sets the filtering time for the displayed values.
¾
Datum - sets the reference datum for your present position and
waypoints in the active route.
¾
GPS Offset - sets an offset for calculating the GPS antenna posi-
tion if you can’t physically locate the antenna exactly where you
want it (e.g. over the centerline of the boat).
¾
Navigation - sets a variety of important functions and alarms
Ö
Rhumb line or Great Circle navigation
Ö
Range units: nautical miles, nautical miles and meters
(when under 1000 meters), nautical miles and feet (when
under 1000 feet), statute miles, statute miles and meters
(when under 1000 meters), statute miles and feet (when
under 1000 feet), kilometers, or kilometers and meters
(when under 1000 meters)
Ö
Cross-track error limit and alarm control
Ö
Waypoint pass criterion and distance: bisector line, per-
pendicular line, complex (combination of bisector line
and perpendicular line), distance to waypoint, or manual
Ö
Waypoint Approach distance
Ö
Autopilot alarm control
Summary of Contents for MX420
