24
Version 2.0
Operator’s Manual
Navigate
You will find the right hand window to be a helpful tool. In addition to
identifying the waypoint you are currently approaching, it identifies
the waypoint at the end of the next leg. The really unique feature of
this screen is the graphical representation of your actual course line
approach angle relative to the next leg of your course. This approach
angle is continuously updated in real time and will help you setup for
course changes.
Reset XTE
and
Skip Waypoint
, described at the end of
NAV2,
is also
available in
NAV3
.
NAV4 - Sensor Input Navigation
The
NAV 4
screen applies the wind instruments, speed log, compass,
and depth sounder inputs from external sensors to your active route,
as appropriate. You can setup the sensors in the
CFG1
screen. The
Installation & Service Manual
will guide you through the interfacing
capabilities of the CDU.
Use the following
CFG1
menus to set this screen up:
Compass
- Sets the input port number, compass type (gyro or mag-
netic), compass deviation table, and the input NMEA 0183 record
from which to derive the compass information. The NMEA 0183
record should be specified by the user, because several NMEA
0183 records may contain compass information. This provides you
the capability of knowing the compass source exactly. The CDU
only accepts NMEA 0183 formatted data for the compass input.
Synchro or stepper gyro compasses are not compatible.
Depth
- Sets the input port number, units of measure for depths and
tide data, sensor offset, alarms, and the input NMEA 0183 record
from which to derive the depth information. The NMEA 0183 record
should be specified by the user, because several NMEA 0183
Summary of Contents for MX420
