Version 2.0
33
Route
Operator’s Manual
Below Waypoint 0 is the waypoint you defined in the
GOTO
function.
Notice that this information is in standard video, black characters on a
white background, and that an ETA time is displayed in the same posi-
tion as the waypoint passed time in Waypoint 0. This indicates that
the waypoint has not yet been passed. Remember that the ETA time is
filtered over time, so allow a few minutes for the filter to settle when
you first get underway or make course and speed changes.
Erasing an Existing Route
To erase the active route:
1. Select the
RTE
key until the
RTE1
screen is displayed.
2. Press the
E
key.
3. Press the
Remove
softkey.
4. Press the
Erase Route
softkey.
5. Press the
Yes
softkey to confirm.
The active route is now erased and ready for new input. If you want to
work in other areas of the CDU first, you will need to press the
E
key to
exit the edit mode.
Summary of Contents for MX420
