Version 2.0
41
Route
Operator’s Manual
5. Press the
E
key to end editing.
There is one special way to add a waypoint to the active route using
the
Plotter
display. This method adds the waypoint between your
present position and the next waypoint in your active route.
1. Select either
PLOT1
or
PLOT2
display.
2. Use the zoom-in or zoom-out softkeys to display the waypoint you
want to insert. Press the
E
key. All waypoints in the waypoint bank
will be displayed if they are within the zoom level of the display.
Note that the waypoint must have a symbol as the first character of
the waypoint name in order for it to be displayed on the
PLOT
screen when the edit mode is not active.
3. Use the cursor key to move the magnifying glass icon over the
waypoint or marker that you want to go to.
Verify that the waypoint number and coordinates are correct in the
left hand window.
4. Press the
GOTO
function key.
5. Press the
E
key to exit the edit mode.
Note that
RTE1
and
PLOT1
are updated with your new waypoint.
Summary of Contents for MX420
