50
Version 2.0
Operator’s Manual
Waypoint
Lat/Lon (W84)
- allows you to enter coordinates in the WGS 84
datum. This choice takes you directly into the coordinate input
screen. Go to step 5.
Lat/Lon Datum
- allows you to choose a datum (see the list in the
screen sample above) from the more than 110 available Datums.
Highlight the desired datum and press the
Select
softkey. Refer
to
Appendix A - Datum List
for a complete list of datums and
their WGS-84 offset. Go to step 5.
Range Bearing
- allows you to define new waypoint coordinates
from an existing waypoint in the Waypoint Bank. When you
use this feature make sure you align the cursor next to the
from
waypoint number before you press the
Make New WPT
softkey.
Once you have entered the range and bearing, the CDU calcu-
lates the coordinates. You can then enter a text description or
modify the waypoint number as described in step 6 below. Go to
step 6.
4b.
Edit This WPT
- Select
Accept
to use the WGS 84 datum or press
Change
to choose from the more than 110 available Datums. High-
Summary of Contents for MX420
