Version 2.0
55
Waypoint
Operator’s Manual
6. Press the
Lock all WPT
softkey.
7. Press the
E
key.
To Unlock all Waypoints
1. Select the
WPT
key until the
WPT1
screen is displayed.
2. Move the cursor to the desired waypoint.
3. Press the
E
key.
4. Press the More softkey.
5. Press the More softkey again.
6. Press the
Unlock all WPT
softkey.
7. Press the
E
key.
Removing Waypoints
Unlocked waypoints can be overwritten by waypoints received on the
NMEA port. Waypoints that are contained within a stored route can
not be removed until they are removed from the stored route in the
RTE2 screen. If you try to remove a waypoint stored in a route, a
warning will be displayed indicating the first route a waypoint is stored
in.
If the waypoint you want remove is locked, refer to the
Waypoint
Summary of Contents for MX420
