74
Version 2.0
Operator’s Manual
Plot
Press the
Display Options
softkey.
The following choices are available:
¾
Show Boat
-
Yes
is the default condition, which places the boat
icon in the middle of the screen.
No
places the boat in a Compass
Rose in the upper right corner of the screen (see the diagram be-
low), where your direction is indicated by the boat in the Compass
Rose. The boat’s position is then indicated by an X in the center of
the screen.
¾
Show All Waypoints
-
Yes
is the default condition, which displays
all waypoints, where the first character of the description is a sym-
bol, in its proper location relative to the boat’s position.
No
causes
none of the waypoints to be displayed.
¾
Show Active Route
-
Yes
is the default condition, which causes the
active route (course lines) and its waypoint symbols to be dis-
played.
No
causes the course lines not to be displayed. Note that
these lines can only be displayed in Rhumb Line navigation mode
(see
CFG1
Navigation
).
¾
Show Recorded Track
-
Yes
is the default condition, which causes
the course you have already traveled to be displayed.
No
causes
the traveled course not to be displayed.
¾
Show Off Track Limit
-
Yes
is the default condition, which causes
the active route cross-track error lines to be displayed. These are
Summary of Contents for MX420
