Version
2.0
85
Tide
Operator’s Manual
Adding a Port
To add a port to the list, first locate it in Part III of the tide table book,
then align the cursor with
Add port to the Port List
and press
E
. The
Zone
in the upper left corner refers to the time zone offset to UTC. Use
the name given in the tide table for the name given in the
Place
portion
of the screen. To help you locate this port in the printed volume later,
use the table number given in the first column of the manual as the tide
number in the CDU.
Then simply follow along the table in the manual and enter the appro-
priate offsets. The software is setup just like the manual. You may
encounter a table that requires seasonal offsets. Where these might
apply, the CDU provides you the opportunity to input a
Fixed
value or
the seasonal
Table
values. Select the first softkey to toggle between
these two selections. Use the second softkey,
Edit Table
, to make the
necessary corrections. Press the
Done
softkey when you finish the
seasonal table, otherwise press the
E
key when the necessary data is
entered.
You can scroll through the entered tables with the up and down cursor
keys when you are not in the edit mode. You also have the option to
modify or delete a port from the list.
Tide table information is mapped to an area of RAM which is saved
during future software upgrades.
Summary of Contents for MX420
