background image

| 1

   | 

NSPL-400 User Manual

Preface

As Navico is continuously improving 
this product, we retain the right to make 
changes to the product at any time which 
may not be reflected in this version of 
the manual. Please contact your nearest 
distributor if you require any further 
assistance.

It is the owner’s sole responsibility to install 
and use the antenna splitter in a manner 
that will not cause accidents, personal 
injury or property damage. The user of this 
product is solely responsible for observing 
safe boating practices.

NAVICO HOLDING AS AND ITS 
SUBSIDIARIES, BRANCHES AND AFFILIATES 
DISCLAIM ALL LIABILITY FOR ANY USE 
OF THIS PRODUCT IN A WAY THAT MAY 
CAUSE ACCIDENTS, DAMAGE OR THAT MAY 
VIOLATE THE LAW.

Governing Language: This statement, 
any instruction manuals, user guides and 
other information relating to the product 
(Documentation) may be translated to, 
or has been translated from, another 
language (Translation). In the event of 
any conflict between any Translation of 
the Documentation, the English language 
version will be the official version of the 
Documentation.

This manual represents the product as at 
the time of printing. Navico Holding AS 
and its subsidiaries, branches and affiliates 
reserve the right to make changes to 
specifications without notice.

Copyright

Copyright © 2012 Navico Holding AS.

Warranty

The warranty card is supplied as a separate 
document.

About this manual

Meet the technical standards in accordance 
with Part 15.103 of the FCC rules

• 

comply with CE under EMC directive 
2004/108/EC

• 

comply with the requirements of level 
2 devices of the Radiocommunications 
(Electromagnetic Compatibility) 
standard 2008 

For more information, please refer to the 
brand web sites:  
www.bandg.com  
www.Lowrance.com   
www.simrad-yachting.com 

Important text that requires special 
attention from the reader is emphasized as 
follows:

 

¼

Note: 

Used to draw the reader’s atten-

tion to a comment or other important 
information.

 Warning:

 Used when necessary to 

warn personnel that they should proceed 
carefully to prevent risk of injury to per-
sonnel or damage to equipment.

Summary of Contents for NSPL-400

























Reviews: