MG9310 LoRa Gateway_User Manual_V1.1.0
Naviecare Ltd
www.Naviecare.com
5
Chapter 2 Installing the LoRaWAN gateway
1. Installation Guide
Because the Naviecare Wireless Gateway for LoRaWAN is a radio device, it is susceptible to common causes of
interference that can reduce throughput and range.
1.1 Powering the gateway up
The gateway will automatically turn on after inserting a PoE cable into the RJ45 connector.
1.2 Insert SIM Card(if use 3G/4G backhaul)
You could follow the next steps to install SIM card in your Gateway .
Step 1. Turn off the gateway
Step 2. Remove the screws on back cover of GW and remove the cover
Step 3. Insert SIM card (SIM card size is big)
Step 4. Close the cover
Step 5. Turn on the gateway
1.3 Mounting
Warning!
If you prepare Ethernet cable first, do not forget the rubber protective cover
Prepare Ethernet connection and mounting place before installation
Select mounting point wisely
Check installation point:
Antenna should be installed on top of the building/tower. There should not be any buildings or other
obstacles which restricts the antenna's field of view. Good examples are tall, standalone buildings.
