37
Connection of oil pipeline
Ȅ
If the fuel line is connected in a single pipe system, be sure to perform air vent work after the
fuel piping installation. (Refer to the method of air vent work presented in the installation manual.)
The oil pipeline shall be securely connected to the oil tank. It shall be free from oil leakage
and separably connected to the oil tank.
The connection points of the oil pipeline shall not be easily deformed or separated.
The oil pipeline shall be made of metal or copper.
The pipe size of the oil pipeline shall be larger than that of the flexible hose.
The oil pipe shall be installed as short as possible and with less resistance so that the
burner may perform normal intake.
Dispersivity foreign objects in the oil pipeline will obstruct normal combustion.
Remove the foreign objects inside the oil tank and the oil pipeline prior to connection
of the oil pipeline with the boiler.
Connect the flexible hose of the boiler with the oil pipeline using the dish nipple.
(The dish nipple is supplied with the boiler.)
The oil pipeline shall be installed evenly without any raised or lowered portion so that
air is not stagnant in the pipeline.
Be sure to connect the fuel line of the boiler in a multiple pipe system.
Summary of Contents for LST-58K
