15
NETWORK SETTINGS
7.1 Navigate to the FS-GUI Network
Settings
1. Open the FS-GUI page.
●
From the Web App landing page, click the word “Diagnostics”
found in blue at the bottom of the screen.
Figure 22: Web App Landing Page
●
From the Web Configurator page, click on the blue
“Diagnostics & Debugging” button in the bottom right
corner of the screen.
Figure 23: Web Configurator Page – Diagnostics Button
Figure 24: FS-GUI Landing Page
3. Click the orange arrow next to the gateway CN number and
title to expand the tree.
4. Click on the orange arrow next to Setup to expand the tree.
5. Click on Network Settings.
Figure 25: Generic FS-GUI Navigation Panel – Network Settings
7. NETWORK SETTINGS
Summary of Contents for Modbus/BACnet Gateway
Page 37: ...Memo...
Page 38: ...Memo...
