2. PROPELLER INSTALLATION
Align the propellers to the motor shaft and press them until fixed.
(Match Propeller A with Shaft A and Propeller B with Shaft B)
Push the battery out of the drone as indicated in the first picture
above. Unplug the battery connector to completely remove the
battery. Next connect the battery to a USB charging source to
begin charging.
Note:
The LED light turns off during charging and turns on when
charging is complete. A full charge takes approx 60 - 80 minutes.
Flight time lasts approx 5-6 minutes,
3. BATTERY CHANGING FOR THE DRONE