NAVC-817D
USER MANUAL
18
Navc-817D Manual Ver 2.3 06/2017
Product Specifications
Note: Please use the supplied Hi current 5V 2Amp USB car charger as
supplied with this product.
Voltage input
12 to 24VDC (Cars and Trucks)
USB Port
For Power only
TV Standard
PAL or NTSC selectable [50 / 60Hz]
Audio Recording
Supported
Screen size
3.0 inch TFT Screen
Date / Time stamp
Supported – on video and on photos
Motion Detection
Supported – whilst stationery as well as moving
and connected to power
Video Resolution
1920 x 1080 30fps
Auto Bump Record (G sensor)
Supported. Adjustable sensitivity
(High, Middle, Low)
Lens viewing angle
Front: 150 degrees Rear: 120 degrees
Cycle recording times
1 or 3 or 5 Minutes
File Format
Image: JPG Video : .MOV Compression: H.264
Memory Card
Micro SD cards supported. Class 10
recommended. Maximum capacity is 32GB
Language System
English [plus various]
For further product information on this and other products please visit our product web
page at
www.
laserco.com.au
or email
support@laserco.com.au
Disclaimer
Certain conditions may prevent the forward collision warnings from operating correctly. Glare, harsh
reflections, low light conditions, rain, fog, dirt, snow on windscreen and on the road can impact how
this feature functions. Forward collision will only operate in normal daylight conditions not lower
than the light conditions on a cloudy day.
Lane Departure Warnings require correct calibration to capture road markings and is recommended
to be used on main roads with good visible road markings. Glare, harsh reflections, low light
conditions, rain, fog, dirt, snow on windscreen and on road markings can impact how this feature
functions. Lane departure warnings will work best on straight roads like motorways and highways,
and performance may be limited on bends and windy roads. Changing lanes may also trigger the
alerts.