NAVC-817D
USER MANUAL
7
Navc-817D Manual Ver 2.3 06/2017
Power On/Off function (auto on/off)
To turn ON/OFF the NAVC-817D, press and hold the power button. When connected to the
car charger (cigarette socket) of your car, the NAVC-817D will turn ON and OFF
automatically when the car’s ignition is turned ON or OFF. If the NAVC-817D does not turn
off immediately it means the device is completing the file save process before turning off
(usually only a few seconds).
Note: If the car charger car charger socket is “constant on” (in some European vehicles), then
the NAVC-817D will need to be turned ON/OFF manually by the power button or by
removing the car charger plug.
Whilst connected to the car charger DC socket (or from a powered USB hub or PC USB port)
and the camera is turned OFF, the LED indicator will glow RED (battery is charging) and will
turn OFF once the battery is fully charged. (Note – the device’s battery will not charge if
connected to a PC USB port)
Setting the Time Zone
From the main Video recording screen, press and hold the MENU button. You will then be
prompted to “Set Time Zone”.
Select YES using the Up and down arrow buttons then press OK. This shortcut will then take
you directly to the Time Zone menu setting, where you can scroll through and select your
location.
Press the OK button, then the MENU button to take you back to the Video recording screen.
Memory Card required for operation
The NAVC-817D requires a Micro SD card (not included) to record video/image content.
For optimal performance, we recommend using a Class 10 Micro SD card to ensure fast data
transfer rates.
See below for a table showing micro SD card capacity and the relevant amount of video
content able to be stored.
Video/Photos Storage Capacity
Resolution
16GB
32GB
Video
1920*1080 (1080p)
4 Hours
8 Hours
1040*720 (720p)
5 Hours
10 Hours
Note: Actual recording times may vary depending on the content of your recording.
